Sheet A-01 · Millwork shop drawings · Greenwood, AR

The saw spins up at seven and every dimension on the sheet already agrees.

Millurano prepares dimensioned shop drawings and cut-ready CAD packages for custom cabinetry and millwork — drafted in Greenwood, Arkansas, billed per project, and issued to cabinet shops, contractors and interior designers.

Issued as plotted PDF + layered DXF / DWG

Long-exposure photo of a CNC router cutting a birch cabinet panel, trailed by violet light streaks
A-14 · Scale 1:8Island elevation, rev C
  • Plan views 1:4
  • Elevations 1:8
  • Section details 1:2
  • Cut lists
  • Panel nesting
  • Hardware schedules
  • Edge-banding keys
  • DXF / DWG export
Fig. 02 · Two ways to reach the saw

A sketch gets questions. A sheet gets cut.

The same cabinet run, released to the floor two different ways. One of them stops the router for a phone call.

Plan A · Released from a sketch

The shop calls back

  • Field dimensions copied by hand, with a filler strip nobody accounted for.
  • A cut list typed from memory, with one door width off by 1/8″.
  • Hinge and slide conflicts found at assembly, once the box is already glued.
  • Three people hold three different versions of the same elevation.
Plan B · Released from a Millurano set

The sheet answers first

  • Every dimension string closes against the overall before the sheet is issued.
  • A cut list generated from the model, checked back against the elevations part by part.
  • Hardware boring and reveals drawn at 1/32″, with the 32 mm line-bore system respected.
  • One revision letter, one title block, one version on the bench.
Fig. 03 · The drawing office

Drafted on Grand Brook Drive, built wherever your shop stands.

Practice note

Drafting is the only thing we do.

Millurano does not build cabinets. We draw them, in a single office in Greenwood, so the people who do build them can cut without calling back for clarification.

Each engagement is scoped, priced and issued per project. Every set is plotted to scale on a standard title block, and every layer follows the same house convention, so a sheet from March reads exactly like a sheet from October.

Read the firm’s drafting standard
Drafting table with scale rule and elevation drawing under swirling lamp light trails Fig. 03a · Drawing desk
Scope

Drawn, never built — so the sheet is the only product.

House standard
Layers
A-CAB · A-DIM · A-HDW · A-CUT
Units
Inches, to 1/32″
Sheet
ARCH D, 24 × 36
Issued to
  • Cabinet shopsCut-ready files for the CNC and the panel saw.
  • ContractorsApproval sets for the owner, release sets for the trades.
  • Interior designersDesign intent converted into buildable dimension.
Office hours

Tue–Sat 8:30am–7pm. Sun 11am–3pm. Mon closed.

Files sent on a Monday enter the queue on Tuesday morning.

Fig. 04 · Release check

Checked against the saw table before it leaves the office.

A drawing set is read back as the shop will read it: part by part, edge by edge, from the cut list to the elevation and back again.

Walnut cabinet carcasses on an assembly bench with sweeping violet light trails
Check 01

Dimension strings close

Each run sums to the overall within tolerance, noted on the sheet.

Check 02

Cut list reconciles

Part count, material and edge-band codes agree with the elevations.

Check 03

Hardware clears

Hinge, slide and pull locations tested against every adjacent part.

Fig. 05 · Fee schedule, per project

Fixed fees, set before the first line is drawn.

Choose the package that matches the size of the job. Fees are billed per project: half at kickoff, the balance on release of the final set.

Table saw blade cutting a maple panel with lavender light streaks
PKG-01 · Run sheet

One run, drawn to the inch

From$385
  • One vanity, built-in or single cabinet run
  • Plan, elevation and section details
  • Cut list as CSV and PDF
  • One revision round · 3 business days
Start a run sheet
Kitchen cabinets being installed, with a moving work light trailing violet streaks Most picked
PKG-02 · Room set

A full kitchen or room, ready to nest

$1,140
  • Every wall elevation, plan and section
  • Hardware and finish schedules
  • Layered DXF / DWG, nested to your sheet stock
  • Two revision rounds · 5–7 business days
Order a room set
Fluted oak lobby paneling with sweeping lavender light trails
PKG-03 · Project book

Whole-building millwork, bound as one set

From$2,690
  • Multiple rooms, whole-home or commercial scopes
  • Indexed sheet set with install sequence
  • Approval set for the owner, release set for the shop
  • Three revision rounds · 10–14 business days
Scope a project book
$62 / hourRevisions after sign-off, billed in quarter-hour increments.
+30%48-hour rush, moved to the front of the Tuesday–Saturday queue.
Fee in writingEvery quote states scope, sheet count and turnaround before work begins.
Fig. 06 · Drafting principle

The Millurano drafting principle

A shop drawing is a promise made in advance to whoever is standing at the saw.
The Millurano drafting standard · Greenwood, Arkansas
Plot plan · Drawing office
51 Grand Brook Dr
Greenwood, AR 72936
Route to the drawing office
Office hours
Tue–Sat
8:30am–7pm
Sunday
11am–3pm
Monday
Closed

Speak to the drafting desk: (866) 904-9667

Fig. 07 · Issued folder

Four files land in your folder.

01 · Plotted set

PDF sheets

ARCH D, plotted to scale, with title block and revision letter.

02 · Machine files

DXF / DWG

Layered, flattened and nested for the CNC you actually run.

03 · Parts

Cut list CSV

Part, quantity, material, grain and edge-band code on every line.

04 · Fittings

Hardware schedule

Hinges, slides and pulls listed by location, with bore dimensions.

Rolled drawings and a tape measure on a workbench under soft light trails
Fig. 08a · Intake
What to bring to the first job

Send the sketch, the field measurements and the spec.

Rough is fine. We resolve it into dimension. The more of the following you can attach, the faster the first sheet moves.

  • A sketch, a photo of the wall, or a designer’s rendering.
  • Wall-to-wall dimensions, plus windows, outlets and plumbing.
  • Door and drawer style, material, and any hardware you have chosen.
  • The sheet stock sizes and file format your CNC expects.
Email the files
CAD cabinet elevation on a monitor in a dim studio with soft violet light streaks
Fig. 08b · Revisions
Questions raised before the first sheet

What drafters get asked first.

Can you work from rough field notes?

Yes. Handwritten dimensions and phone photos are routine. Where a note is ambiguous, we mark it on the sheet and ask before it becomes a cut.

Will the files run on my machine?

We export layered DXF or DWG and nest to the sheet stock you name. Tell us the controller or software and we match the layer and tool conventions.

How are changes handled after I approve?

Each package includes its stated revision rounds. Changes beyond those are billed at $62 per hour, and every change is issued under a new revision letter.

Who owns the drawings?

You do, once the final invoice is paid. The set is yours to build from, reprint and file with the job.

Call the desk Get a quote